Using The Infinity With 2 Deluxe Bathfill Temperature Controllers; Setting The Sound Volume -Bathfill Kitchen Controller - Rinnai infinity 32 HD 250 E User Manual

OPERATION WITH DELUXE BATHFILL TEMPERATURE
Using the Infinity with 2 Deluxe Bathfill Temperature
Controllers
When 2 Temperature Controllers are used, they must be
models MC-70-2A (Kitchen) and BC-70-2A (Bathroom).
Switching the System ON
The hot water system and both controllers can be
switched on and off from either controllers by
pressing the 'ON/OFF' button as shown. When the
system is turned on, the monitor will be lit. During
normal operation the system is left on.
Setting the Clock
The clock is of the 12 hour AM/PM type and is set on the
Kitchen Controller (MC-70-2A).
Press the 'Clock' button. The digital monitor
will flash AM 12:00.
Set the time using the 'Hour' and 'Min.'
buttons. The time is displayed on the monitor
as the buttons are pressed. The numbers on the
monitor will continuously change if you keep
the buttons depressed. When you get close to
the desired time, press the button
intermittently.
Press the 'Clock' button again to activate the
clock.
The time displayed on the Kitchen Controller is automatically displayed on all Bathroom
Controller(s) when the Bathroom Controller(s) are ON. If the controllers are OFF, the time is
only displayed on the Kitchen Controller. The clock may need to be reset after a power failure.
NOTE
CONTROLLERS
AM
0 0
Clock Hour
ON/OFF
AM
0 0
Clock Hour
ON/OFF
- 19 -
Transfer
0 0
Ho t wa ter
tem p.
Min.
Hotter
Sound Cooler
Vol.
M C -7 0 -1 A
C
Transfer
0 0
Ho t wa ter
tem p.
Min.
Cooler Hotter
Sound
Vol.
M C -7 0 -1 A
AM
0 0
Clock Hour
ON/OFF
C
AM
0 0 0 0
Clock Hour Min.
Sound
ON/OFF
Vol.
AM
0 0
Clock Hour
ON/OFF
C
0 0
Min.
Sound
Vol.
C
0 0
Min.
Sound
Vol.