Tablet Dock Interface Port - Fujitsu ST4000 Technical Reference Manual

Tablet Dock Interface Port

The Tablet Dock interface port on the Stylistic
ST4000 Tablet PC allows you to attach the Stylistic
ST4000 Tablet Dock. The interface port is a 100-pin
connector. The following figure and table show the
pin locations for the interface port connector on the
Tablet PC.
Signals designated with the "pound" (#) symbol are
active low.
100 99 98 97
50
49 48 47
Pin Signal Name
1 DC-IN
2 DC-IN
3 DOCK_ON0
4 GND1
5 GND1
6 GND1
7 GND1
8 GND1
9 GND1
10 GND1
11 GND1
12 BAY_ID0
13 BAY_ID1
14 BAY_ID2
15 BAY_ID3
16 NC
Table 4-4. Tablet Dock Interface Connector Pin Assignments
Level
+16V
+5V
GND
Notes: • Signal names listed in the second column of this
table are not industry standard signal names.
They are provided to assist in cross-referencing
these signal names when they appear elsewhere.
• Signals provided on the system interface port
duplicate signals for connectors on the Tablet PC.
Do not use peripheral connectors on the Tablet
PC when using corresponding interfaces on the
system interface port.
• The connectors used for the system interface port
are manufactured by Hirose. Connector part
numbers are: EX80-1005 (main unit) and
EX80-100P1 (tablet dock side)
Description
DC Power Input
Dock Detect
Ground
Tablet Dock Interface Port
51
52
54 53
1
2
4 3
Port or Connector
DC-IN
Docking Station
4
35