Lldp Med-Location - TP-Link T2600G-28TS Reference Manual

lldp med-location

40.11
Description
The lldp med-location command is used to configure the Location Identification
TLV's content in outgoing LLDPDU of the port.
Syntax
lldp med-location { emergency-number identifier | civic-address [ [ language
language ] [ province-state province-state ] [ county county] [city city ] [ street
street ] [ house-number house-number ] [name name ] [ postal-zipcode
postal-zipcode ] [ room-number room-number ] [ post-office-box post-office-box ]
[ additional additional ] [ country-code country-code ] [ what { dhcp-server |
endpoint | switch } ] ] }
Parameter
emergency-number —— Emergency Call Service ELIN identifier, which is used
during emergency call setup to a traditional CAMA or ISDN trunk-based PSAP.
The length of this field ranges from 10 to 25 characters.
civic-address —— The civic address is defined to reuse the relevant sub-fields
of the DHCP option for civic Address based Location Configuration Information
as specified by IETF.
Command Mode
Interface Configuration Mode (interface gigabitEthernet / interface range
gigabitEthernet)
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Configure the civic address in the Location Identification TLV's content in
outgoing LLDPDU of port 1/0/2. Configure the language as English and city as
London:
T2700-28TQ (config)# interface gigabitEthernet 1/0/2
T2700-28TQ(config-if)# lldp med-location civic-address language English
city London
368