Lldp Med-Location - TP-Link T1600-28TS Cli Reference Manual

T1600G-52TS(config-if)# no lldp med-tlv-select network-policy inventory-
management
30.11

lldp med-location

Description
The lldp med-location command is used to configure the Location
Identification TLV's content in outgoing LLDPDU of the port.
Syntax
lldp
[ [ language
city
[ postal-zipcode
[ post-office-box
country-code
Parameter
emergency-number —— Emergency Call Service ELIN identifier, which is
used during emergency call setup to a traditional CAMA or ISDN trunk-based
PSAP. The length of this field ranges from 10 to 25 characters.
civic-address —— The civic address is defined to reuse the relevant
sub-fields of the DHCP option for civic Address based Location Configuration
Information as specified by IETF.
Command Mode
Interface Configuration Mode (interface gigabitEthernet / interface range
gigabitEthernet)
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Configure the civic address in the Location Identification TLV's content in
outgoing LLDPDU of port 1/0/2. Configure the language as English and city as
London:
T2700-28TQ (config)# interface gigabitEthernet 1/0/2
T2700-28TQ(config-if)# lldp med-location civic-address language English
city London
med-location { emergency-number
language
] [ province-state
street
] [ street ] [ house-number
postal-zipcode
post-office-box
] [ what { dhcp-server | endpoint | switch } ] ] }
identifier
province-state
house-number
] [ room-number
additional
] [ additional
304
| civic-address
county
] [ county ] [city
name
] [name
room-number
] [ country-code
]
]