Manual Wireless Settings; N/G (2.4Ghz) - D-Link DIR-816L User Manual

Section 3 - Configuration
Enable Wireless:
Check the box to enable the wireless function. If you do not want to use
wireless, uncheck the box to disable all the wireless functions.
New Schedule:
Select the time frame that you would like your wireless network enabled.
The schedule may be set to Always. Schedules you create will be available
in the drop-down menu. Click New.Schedule to create a schedule.
Wireless Network
Service Set Identifier (SSID) is the name of your wireless network. Create
Name:
a name for your wireless network using up to 32 characters. The SSID is
case-sensitive.
802.11 Mode:
Select one of the following:
802.11b.Only - Select only if all of your wireless clients are 802.11b.
802.11g.Only - Select only if all of your wireless clients are 802.11g.
802.11n.Only - Select only if all of your wireless clients are 802.11n.
Mixed.802.11g.and.802.11b - Select if you are using both 802.11g and
802.11b wireless clients.
Mixed.802.11n.and.802.11g - Select if you are using both 802.11n and
802.11g wireless clients.
Mixed.802.11n,.11g,.and.11b - Select if you are using a mix of 802.11n, 802.11g, and 802.11b wireless clients.
Enable Auto Channel The Auto.Channel.Scan setting can be selected to allow the DIR-816L to choose the channel with the least amount of interference.
Scan:
Wireless Channel: Indicates the channel setting for the DIR-816L. The Channel can be changed to fit the channel setting for an existing wireless network or to customize the
wireless network. If you check Enable.Auto.Channel.Scan, this option will be greyed out.
Transmission Rate: Best (automatic) is selected by default, or you can select a channel from the drop-down menu.
Channel Width: Select the Channel Width:
20/40MHz.(Auto) - This is the default setting. Select if you are using both 802.11n and non-802.11n wireless devices.
20MHz - Select if you are not using any 802.11n wireless clients.
Visibility Status: Select Invisible if you do not want the SSID of your wireless network to be broadcasted by the DIR-816L. If Invisible.is selected, the SSID of the DIR-816L will
not be seen by Site Survey utilities so your wireless clients will have to know the SSID of your DIR-816L in order to connect to it.
Wireless Security: Refer to "Wireless Security" on page 44
D-Link DIR-816L User Manual

Manual Wireless Settings

802.11n/g (2.4GHz)

for more information regarding wireless security.
42