Labeling Exercises - Panduit Cougar LS9 Operator's Manual

LABELING EXERCISES

Exercise 1
Create a wire marker on continuous cloth tape
•
Step 1: Insert a continuous cloth tape cassette, such as T100X000CBC-
BK
•
Step 2: When prompted, select New Blank File. Save previous label if
necessary.
•
Step 3: Press F4 (this is the quick key for wire marking settings)
•
Step 4: Set length as 1.50 inches
•
Step 5: Type 1234
•
Step 6: Press PRINT
Results:
1234
1234
1234
1234
1234
1234
1234
1234
1234
Exercise 2
Create basic text on heat shrink tubing
•
Step 1: Insert a heat shrink tubing label cassette such as H000X044F1C
•
Step 2: When prompted, select New Blank File. Save previous label if
necessary.
•
Step 3: Type ABCD
•
Step 4: Press PRINT
Results:
ABCD
ABCD
ABCD
Hint: The text size defaults to 10 point
font when pressing F4.
You can adjust the font size by
pressing the SIZE key.
You can adjust the label mode by
pressing the LABEL key.
Hint: H000X044F1C defaults to 10 point
font printed in Wire Marker Mode with
an "Auto" length setting.
You can adjust the font size by
pressing the SIZE key.
You can adjust the label mode by
pressing the LABEL key. For
example, try Tape Mode.
You can set a fixed tubing length by
using the LENGTH function. For
example, enter 200 for 2.00 inches
31