Panduit Cougar LS9 Operator's Manual page 34

LABELING EXERCISES
Exercise 5
Create a symbol label on continuous tape
•
Step 1: Insert a continuous tape label cassette, such as T100X000VXC-
BK
•
Step 2: When prompted, select New Blank File. Save previous label if
necessary.
•
Step 3: Press SHIFT key and let go
•
Step 4: Press A key
•
Step 5: Press SPACE
•
Step 6: Type CAUTION
•
Step 7: Press PRINT
Results:
CAUTION
Exercise 6
Create terminal block labels
•
Step 1: Insert a terminal block cassette (T024X000FJC-BK,
T031X000FJC-BK, or T038X000FJC-BK)
•
Step 2: When prompted, select New Blank File. Save previous label if
necessary.
•
Step 3: Enter the terminal spacing (ie. 0.25")
•
Step 4: Change rotation to 0 degrees for all pages. (Press the Shift +
Enter keys and select 0. Press Enter. Select All Pages. Press Enter.)
•
Step 5:
Create text....
o
Each terminal has up to 8 lines available. You may
need to increase the terminal space or decrease the
font size to fit additional lines. Up to 9 terminals can be
created in this way.
Use the Page key to move to the next or to the previous
terminal
...or create a serialization...
o
Press the Insert key, select serial
34