Effect; Midi In; Set Change Channel; Tune - Kurzweil sp88x User Manual

Effect

Snd, Set, Off
This parameter speciÞes how the effects processor in the internal sound module
responds to MIDI Setup changes. The possibilities are:
Snd Sound. The effect associated with the internal sound as deÞned for Internal
Voices mode is selected regardless of the Effect speciÞed by a setup. This is
the default setting.
Set Setup. The effect speciÞed by a setup is what is used for the internal sound.
Off Off. The internal effects processor is turned off.

MIDI In

Nrm, Mrg
This controls what happens to MIDI messages received by the MIDI In port. Nrm
(Normal) means that received messages are only interpreted, not resent. Mrg (Merge)
means that all MIDI messages (except System Exclusive) are merged with internally
generated messages and then resent to the MIDI Out port.

Set Change Channel

Set Chg Chan: Off, 1–16
You can use a sequencer or external MIDI processor to automatically change MIDI
setups on your Stage Piano. By default, this feature is off. To enable it, change this
parameterÕs value to match the MIDI channel on which you want the Stage Piano to
receive MIDI Program Change messages. The MIDI Program Change number should
be the same as the setup number, from 1 to 32.
This parameter has an effect only in MIDI Setups mode. In Internal Voices mode,
Program Change messages received on MIDI Channel 1 select sounds directly.
NOTE: The Stage Piano must be in Play mode to respond to Program Change messages.

Tune

-50 to +50
You can tune the internal sound module to match an external instrument or alternate
tuning standard by using this parameter. The default of 0 gives A=440 tuning to a high
degree of precision. Each increment above or below that represents a 1 cent change
which is 1/100 of a semitone or about 0.06% frequency change. Thus the total range is
a quarter-tone down or up (A=427.1 to A=453.3 Hertz). Note that tuning has an effect
only when notes are started.
Global Parameters
Access to the Global Parameters
5-3