Sony HT-ST7 Service Manual page 28

HT-ST7
6. In the state of step 4, press the [INPUT] button and model
name "HT-ST7" is displayed on the fl uorescent indicator tube.
Each time the [VOLUME +] button is pressed, the display
changes from destination → MC (-com) version → SY (sys-
tem) version → UI version → TA (AMP) version → DS (DSP)
version → BT (Bluetooth) version → NF (NFC) version →
HD (HDMI) version, → CE (CEC) version → PF (platform)
version → WS (wireless sound) version in this order, and re-
turns to the model name display.
Model name
Destination
MC version
SY version
UI version
TA version
DS version
(Displayed values in the above fi gure are example)
Destination
US, Canadian and Australian models
AEP and UK models
7. When [INPUT] button is pressed while the each version is dis-
played on the fl uorescent indicator tube, year, month and day
of the software creation is displayed on the fl uorescent indica-
tor tube.
(Displayed values in the above fi gure are example)
When [INPUT] button is pressed again, the display returns to
the each version display.
28
BT version
NF version
HD version
CE version
PF version
WS version
Display
NA
CE2
Releasing method:
Press the [ ] button to release the test mode menu.
?/1
(When the "K 0" to "K 4" is displayed on the fl uorescent indicator
tube, press the [ ] button on the remote commander to release
?/1
the test mode menu)
2-2. Model Name Display Mode
It can display the model name.
Procedure:
1. Enter the test mode menu.
(Refer to "Setting method of the test mode menu" on page 27)
2. Press the [VOLUME +]/[VOLUME –] buttons to select the
"HT-ST7".
2-3. Destination Display Mode
It can display the destination.
Procedure:
1. Enter the test mode menu.
(Refer to "Setting method of the test mode menu" on page 27)
2. Press the [VOLUME +]/[VOLUME –] buttons to select the
destination.
(Displayed values in the above fi gure are example)
Destination
US, Canadian and Australian models
AEP and UK models
2-4. MC Version Display Mode
It can display the MC (-com) version.
Procedure:
1. Enter the test menu.
(Refer to "Setting method of the test mode menu" on page xx)
2. Press the [VOLUME +]/[VOLUME –] buttons to select the
"MC.X.XXX" (X.XXX: MC (-com) version).
(Displayed values in the above fi gure are example)
2-5. Serial Flash Version Display Mode
It can display the SF (serial fl ash) version.
Procedure:
1. Enter the test menu.
(Refer to "Setting method of the test mode menu" on page 27)
2. Press the [VOLUME +]/[VOLUME –] buttons to select the
"SF.X.XXX" (X.XXX: SF (serial fl ash) version).
(Displayed values in the above fi gure are example)
Display
NA
CE2