Loudspeaker (6.5 Cm) (Sp5, Sp6, Sp7, Sp8, Sp9) - Sony HT-ST7 Service Manual

2-14. LOUDSPEAKER (6.5 cm) (SP5, SP6, SP7, SP8, SP9)

4 loudspeaker (6.5 cm) (SP6)
Note 1: Procedure of removal of SP5, SP7, SP8
and SP9 are the same as the SP6.
SP5
3 terminal (narrow side)
[black]
– –
2 Remove the loudspeaker (6.5 cm) (SP6)
terminals position
(wide side) [gray]
terminals position terminals position
(narrow side) [black] (narrow side) [black]
loudspeaker (6.5 cm)
(SP5)
1 two screws
1 two screws
(3.5)
SP7
SP9
SP8
in the direction of an arrow.
Note 3: When installing the loudspeaker (6.5 cm) (SP5, SP6, SP7, SP8, SP9),
make the position of terminals as shown in the figure below.
terminals position terminals position
(wide side) [gray] (wide side) [blue]
terminals position
(narrow side) [black]
loudspeaker (6.5 cm)
(SP7)
(3.5)
3 terminal (wide side)
[red]
Note 2: When installing the speaker wire, make the
position of caulking of terminals is outside.
narrow side
[black]
loudspeaker (6.5 cm)
terminals position
(wide side) [red]
terminals position
(narrow side) [black]
loudspeaker (6.5 cm) loudspeaker (6.5 cm)
(SP9) (SP8)
HT-ST7
wide side
[SP5: gray]
[SP6: red]
[SP7: gray]
[SP8: red]
[SP9: blue]
terminals position
(wide side) [red]
terminals position
(narrow side) [black]
loudspeaker (6.5 cm)
(SP6)
15