Select Media Source for Calendar Slideshow
You can easily change the media source if you want the
calendar/clock slideshow to display photos from a different media
source (i.e., memory card, slideshow folder).
1. On the
select the
2. Select the desired media source from the
Set Schedule
You can schedule the DPF to automatically go into a "stand-by"
mode and resume operation according to your weekly schedule. For
example, if you have your DPF on your desk at work, you may want
to display the calendar/clock or play a slideshow from 8:30am to
5:30pm every weekday, and then set the DPF to remain in stand-by
mode throughout the weekend. The following Monday morning, the
DPF would resume operation at 8:30am.
1. On the
2. Select
3. Use
field values in
4. To set the
Schedule
5. Use
field values in
6. When correct times are set, select
screen.
Disable Schedule
After the schedule has been enabled (per above instructions), you
can disable the schedule whenever desired.
1. On the
2. Select
Schedule
will display
20
CALENDAR/CLOCK
Media Source
CALENDAR/CLOCK
.
Set Schedule
to move between the fields and
Weekdays On/Off
Weekends On/Off
button, and then use
to move between the fields and
Weekends On/Off
CALENDAR/CLOCK
, and then select the
Set Schedule
or
Enable Weekends Schedule
.
OFF
screen, press
button in the upper right corner.
Select Media
screen, press
.
, select the
Enable Weekends
to access the settings.
.
to return to the previous
Done
screen, press
Enable Weekdays
, and then
MENU
screen.
.
MENU
to change the
to change the
.
MENU
button. The time fields