Set Schedule; Disable Schedule; Run The Schedule - Pandigital PI1002DW User Manual

Set Schedule

You can schedule the DPF to automatically go into a "stand-by"
mode and resume operation according to your weekly schedule. For
example, if you have your DPF on your desk at work, you may want
to display the calendar/clock or play a slideshow from 8:30am to
5:30pm every weekday, and then set the DPF to remain in stand-by
mode throughout the weekend. The following Monday morning, the
DPF would resume operation at 8:30am.
1. On the
2. Select
3. Use
field values in
4. To set the
Schedule
5. Use
field values in
6. When correct times are set, select
screen.

Disable Schedule

After the schedule has been set (per above instructions), you can
disable the schedule whenever desired.
1. On the
2. Select
Schedule
will display
3. Select

Run the Schedule

After the schedule times have been set (per above instructions), you
will use the
to take effect.
There are two methods for running the schedule, either from a
slideshow or from the
26
CALENDAR/CLOCK
Set Schedule
.
to move between the fields and
Weekdays On/Off
Weekends On/Off
button, and then use
to move between the fields and
Weekends On/Off
CALENDAR/CLOCK
Set Schedule
, and then select the
Enable Weekends Schedule
or
OFF
.
Done
.
Run Schedule
function whenever you want the schedule
CALENDAR/CLOCK
MENU
screen, press
.
Enable Weekends
, select the
to access the settings.
.
Done
to return to the previous
MENU
screen, press
Enable Weekdays
button. The time fields
screen.
.
to change the
to change the
.