Download Print this page

Periodic Cleaning - Wells F014 Service Instruction

Advertisement

PERIODIC CLEANING

CAUTION:
BURN HAZARD
Be sure frypot and
elements are dry before
returning unit to service.
Water left in the frypot will
boil off when heating,
splattering hot oil.
CAUTION:
BURN HAZARD
Before cleaning, ALWAYS:
Unplug the fryer and
allow to cool.
Drain the oil and wipe
out the frypot.
Periodic cleaning is
necessary to remove
carbonization from the
elements and frypot.
Frypot may be cleaned by
the method described at
right, or with a commercial
frypot cleaner. Be sure to
follow the manufacturer's
directions.
PERIODIC CLEANING
Add 1/2 cup of granulated dishwasher detergent to frypot. Fill with water
to the MAX OIL line.
Lower the element into the frypot and set the control knob to 225ºF
Boil the mixture for five minutes. Turn the control knob to OFF. Allow the
mixture to set in the frypot overnight.
After the soak period, raise the elements and remove any remaining
carbonization with a stiff bristle brush. Be careful that the capillary tubes
of the thermobulbs are not moved or damaged during cleaning.
Drain the frypot and wash with warm water and mild detergent.
Reinstall the frypot in the fryer. Add 1 quart of vinegar, then fill to the MAX
OIL line with cold water.
Lower the elements into the vinegar solution. Allow to set for 15 minutes.
Drain the frypot and rinse with clean water. Dry the frypot and elements
thoroughly before returning the fryer to operation.
IMPORTANT:
Nickel plated frypot must be dried completely in order to prevent rusting,
and to eliminate water contamination of the cooking oil.
2

Advertisement

loading

This manual is also suitable for:

Llf-14F049F-55F-556F-67F-676 ... Show all