Panasonic AG-DTL1 Operating Instructions Manual page 80

RS-232C
$ Time lapse control commands
These commands are not acknowledged while a search control command is being processed.
Data transmitted by PC
[STX] LRB:m [ETX]
Parameter
m = F: Buzzer OFF
0: 5 minutes
1: 10 minutes
2: 20 minutes
3: 30 minutes
[STX] LRI:m [ETX]
Parameter
m = A: Alarm signal input is
acknowledged.
F: Alarm signal input is
ignored.
[STX] LRM:m [ETX]
Parameter
m = E: External timer recording
I: Internal timer recording
N: Regular recording
[STX] LRR:m [ETX]
Parameter
m = N: REC REVIEW is performed
automatically.
F: REC REVIEW OFF
[STX] LSQ:m:t [ETX]
Parameter
m = 0—F: Camera No.1—16
t = A: Auto sequence mode
M: Manual sequence mode
[STX] LST:data1:data2 [ETX]
Parameter
data1 = ndmmtt (start date/time)
data2 = ndmmtt (end date/time)
n = 1: 1st week
2: 2nd week
3: 3rd week
4: 4th week
L: Last week
d = 0: Sunday
1: Monday
2: Tuesday
3: Wendnesday
4: Thursday
5: Friday
6: Saturday
mm = 01—12: Month
tt = 01—22: Hours
Data returned from unit in response
[STX] LRB [ETX]
[STX] LRI [ETX]
[STX] LRM [ETX]
[STX] LRR [ETX]
[STX] LSQ [ETX]
[STX] LST [ETX]
80
Description of command
Sets the buzzer to sound a warning in the event that the
unit has been kept in the stop mode for the time designated
by the parameter.
Sets whether alarm recording or sensor recording is to be
performed if an alarm signal has been input while repeat
recording is underway or while the tape is being rewound.
Sets the timer recording mode.
Sets REC REVIEW.
This function plays back the recording after recording for a
specific time to detect whether the proper video level is
being maintained during recording.
Selects the camera number and sequence mode.
Sets the start date/time and end date/time settings for
daylight saving time.