Panasonic AG-DTL1 Operating Instructions Manual page 57

RS-232C
O Media operation control commands
Data transmitted by PC
[STX] HEA [ETX]
[STX] HEE [ETX]
[STX] HRE:m [ETX]
[STX] HRL:m [ETX]
[STX] HTI:m [ETX]
[STX] HTR:m:b [ETX]
O Operation control commands
Data transmitted by PC
[STX] OAC [ETX]
[STX] OAF [ETX]
[STX] OAI:n [ETX]
[STX] OAR [ETX]
[STX] OEJ [ETX]
[STX] OFF [ETX]
[STX] OPA [ETX]
[STX] OPL [ETX]
[STX] OPR [ETX]
[STX] ORC [ETX]
[STX] ORR [ETX]
[STX] ORW [ETX]
[STX] OSF:n [ETX]
[STX] OSP [ETX]
[STX] OSR:n [ETX]
Data returned from unit in response
[STX] HEA [ETX]
[STX] HEE [ETX]
[STX] HRE [ETX]
[STX] HRL [ETX]
[STX] HTI [ETX]
[STX] HTR [ETX]
Data returned from unit in response
[STX] OAC [ETX]
[STX] OAF [ETX]
[STX] OAI [ETX]
[STX] OAR [ETX]
[STX] OEJ [ETX]
[STX] OFF [ETX]
[STX] OPA [ETX]
[STX] OPL [ETX]
[STX] OPR [ETX]
[STX] ORC [ETX]
[STX] ORR [ETX]
[STX] ORW [ETX]
[STX] OSF [ETX]
[STX] OSP [ETX]
[STX] OSR [ETX]
57
Description of command
Sets the unit's operation when the EJECT button is pressed
to REW 5 EJECT.
Sets the unit's operation when the EJECT button is pressed
to EJECT.
Sets the unit's operation mode at the tape-end position
during recording.
Sets the lock mode for the operation during recording.
Sets the operation mode that is to be established when the
tape has been inserted.
Sets the warning for when the tape-end position is about to
be reached.
Description of command
Releases the alarm signal input.
Advances the tape frame by frame in the forward direction.
Inputs the alarm signal.
Advances the tape frame by frame in the reverse direction.
EJECT
FAST FORWARD
PAUSE
PLAY
REVERSE PLAY
RECORD
REC CHECK
REWIND
FORWARD SEARCH
STOP
REVERSE SEARCH