Table of Contents
Advertisement
Available languages
Available languages
Performing initial settings
If the clock is running fast or slow, follow the steps
below to adjust it.
$ Simple time adjustment
When the clock is running up to 30 seconds fast or
slow
1 2
2
1
∫
4
6
5
H
2
1
Set the power switch to ON.
2
The second digits of the time are reset to "00"
when the 00: button is pressed in synchronization
with the time signal, etc.
They are reset to "00" when the button is pressed
while the display shows 0 to 29 seconds. They are
carried up to 1 minute and set to "00" when it is
pressed while the display shows 30 to 59 seconds.
4
3
;
3
<
4
3
H
1
When the clock is running up to 15 minutes fast or
slow
1 2•4
2
1
6
5
1
Set the power switch to ON.
2
Set the PROGRAM switch to the "adjust time"
position.
The counter display shows the current time, and
the "minutes" digits flash.
3
The minute and second digits of the time are reset
to "00:00" when the RESET button is pressed in
synchronization with the time signal, etc.
They are reset to "00:00" when the button is
pressed while the display shows 0 to 14 minutes.
They are carried up to 1 hour and set to "00:00"
when it is pressed while the display shows 45 to 59
minutes.
4
Upon completion of the settings, set the
PROGRAM switch to the OFF position.
12
3
4
3
∫
;
4
3
<
4
3
H
H
2
1
Advertisement
Chapters
Table of Contents
