Servo Reference - Panasonic AJ-D440 Operating Instructions Manual

Servo reference

This unit automatically selects the input video signal selected by the INPUT switch, the
reference video signal supplied from the REF VIDEO input connector or the internal sync
signal as the servo reference signal.
When the signal is selected, the unit's mode and servo reference stand in the relationship
shown in the flowchart presented below.
Applicable only to AJ-D450.
1
What is the SERVO REF on the setup
menu No. 304 setting?
AUTO
2
Is the unit in the recording mode?
NO
3
Is the unit in the editing mode?
(Is VIDEO, CH1, CH2, CUE or TC
selected?)
NO
4
Is the REF VIDEO signal supplied?
YES
The REF VIDEO input
signal serves as the
reference signal.
EXT
YES
YES
NO
NO
The internal sync signal
serves as the reference
signal.
– 48 –
Is the input video signal
available?
YES
The input video signal
serves as the reference
signal.