Figure 17 - Advanced Display Formats With The Process Variable; Table 15 - Advanced Displays With Pv Format Display Indications - Honeywell stt850 SMARTLINE User Manual

Advanced Display
with process variable
Figure 17 – Advanced Display Formats with the Process Variable
Table 15 – Advanced Displays with PV Format Display Indications
Display Indicator
Diagnostic /
Maintenance
These indicators are
displayed in the upper
left corner of the
screen when the
associated conditions
are present in the
transmitter.
Page 48
Advanced Display
with Bar graph
D Diagnostic condition present
This indicator is displayed any time a diagnostic is present in the
transmitter, either Critical or Non-Critical. If a Critical Diagnostic is
present, the message "Critical Diag" will flash at the top of the
screen and the appropriate Diagnostic screen will be inserted into
the normal screen rotation.
To determine which Non-Critical diagnostics are active, use the
local buttons to call up the Non-Critical diagnostics menu (Main
Menu\Diagnostics\Non-Critical. Refer to
Table 10
Table 10
diagnostics.
M Maintenance Mode is active
For HART and DE, this indicator is set by the Experion DCS. For
Fieldbus, the transmitter internally sets this mode
Mode is active, a screen with the text "Available for Maintenance"
will be inserted into the normal screen rotation to make it easy to
identify transmitters that are available for maintenance.
STT850 Temperature Transmitter User's Manual
What It Means
for details concerning the Non-Critical
Advanced Display
with Trending
.
When this
Revision 3