Monitoring The Basic Display; Basic Display; Figure 18 - Basic Display With Process Variable Format - Honeywell ST 700 User Manual

4.5 Monitoring the Basic Display

This section describes the information shown on the operator screens of the Basic Display.

4.5.1 Basic Display

Figure 18 illustrates the Basic Display format with Process Variable (PV).
•
The PV value is user-configurable. This field has 7 characters. The maximum allowable
numeric value is 9999999 or -999999. If fractional decimals are configured, the fractional
positions will be dropped, as required. If the PV value exceeds the above limits, it is divided
by 1000 and "K" is appended to the result, allowing a maximum value with multiplier of
999999K or -99999K.
•
Process Variable Tag is user-configurable from a HART Host. This field has 14 characters.
•
Engineering Units. This field is user-configurable. This field has 8 characters.
Page 72
Figure 18 – Basic Display with Process Variable Format
ST 700 SmartLine Pressure Transmitters User's Manual Revision 1.0