Characteristics Of The Ethernet Cps; Communications Processors For S7300 - Siemens S7-300 Configuration Manual

Characteristics of the Ethernet CPs

2.1

Communications processors for S7300

The module was designed to match the components of the S7-300/C7300 programmable
logic controller and has the following features:
● Compact modules (single or doublewidth) for simple installation on the S7 standard rail;
● Can be used in central or expansion racks;
● The display elements are all located on the front panel;
● No fan necessary;
● Direct backplane bus connection via the supplied bus connector;
● Interfaces wide design:
● Interfaces narrow design:
● The configuration of the CP is possible over MPI or LAN/Industrial Ethernet. The version
Configuring and commissioning S7 CPs for Industrial Ethernet
Configuration Manual, 09/2013, C79000-G8976-C182-13
2 x RJ45 jack as 2port switch PROFINET for attachment to twistedpair Ethernet,
1 x RJ45 jack for attachment to gigabit Ethernet
2 x RJ−45 jack as 2−port switch PROFINET for connection to twisted-pair Ethernet
of STEP 7 must be released for the device type necessary.
Legend:
1) LEDs
2) PROFINET interface: 2 x 8pin RJ45 jack
3) X = placeholder for hardware product version
2
33