Security; Topology - Siemens S7-300 Configuration Manual

11.3.10

Security

The "Security" entry in the navigation panel provides information about the configured
security functions.
Note
Security enabled - navigation panel "IP Access Protection"
The navigation panel "Security" only exists if security is enabled. If security is disabled, you
can obtain corresponding information from the "IP Access Protection" navigation panel.
Project information
Author
Date created
Project name
Last changes
Entries exist here if changes have been made.
Author
Date created
Project name
Operating modes
Display of the current statuses of the individually listed security functions
Level 2 firewall
Level 3 firewall
Level 2 VPN
Level 3 VPN
Certificate
Signature check
User management
Logging
11.3.11

Topology

Topology of the PROFINET nodes
The "Topology" Web page provides information about the topological configuration and
status of the PROFINET devices on your PROFINET IO system.
There are three tabs for the following views:
Configuring and commissioning S7 CPs for Industrial Ethernet
Configuration Manual, 09/2013, C79000-G8976-C182-13
Parameters
11.3 Diagnostics pages of the CP
Name of the user who last loaded the configuration data.
Date and time of the last configuration
Initially configured name of the STEP 7 project.
Name of the user who made the current change.
Date and time of the change.
Current name of the STEP 7 project.
Possible operating modes are:
Not configured
•
Configuration was adopted
•
Error in configuration
•
Web diagnostics
Function
187