Topology - "Status Overview" Tab; Update Center; Update Center - "Firmware" Tab - Siemens S7-300 Configuration Manual

Web diagnostics
11.3 Diagnostics pages of the CP
11.3.11.3

Topology - "Status overview" tab

Meaning
The "Status overview" tab provides a clear presentation of all PROFINET IO
devices/PROFINET devices (without connection relations) on one page. A quick error
diagnostics is possible based on the symbols that show the module statuses.
For the meaning of the status symbols, refer to the tables in section Topology - "Table view"
tab (Page 192)
Status information as tooltip
If you place the mouse pointer on the module symbol, you will see information about the
status in plain language.
Link between the "Topology Status overview" and "Module information" Web pages
The two web pages, "Topology" and "Module information", are linked. A click on the
displayed module in the status overview automatically takes you to this module on the
"Module information" Web page.
"Module status / rack configuration (Page 175)".
11.3.12

Update center

On the following tabs, the "Update center" entry in the navigation panel provides functions
for transferring data to the CP:
● "Firmware" tab
● "Access control list" tab
● "Diagnostics messages" tab
Note
CP with security function
With the security function enabled, the functions described below assume that the
following right is always set in the rights list alongside the other listed rights:
"Web: Access Web diagnostics and CP file system"
11.3.12.1

Update center - "Firmware" tab

Meaning
The update center allows reloading, management and activation of firmware versions on the
CP. For a description, see section Loading from the Download Center (Page 219)
Requirement:
The tab exists if the "Firmware download via Web" option is selected on the CP.
194
Configuring and commissioning S7 CPs for Industrial Ethernet
Configuration Manual, 09/2013, C79000-G8976-C182-13