Table of Contents
Advertisement
Connecting to the
mains
36
Warning!
Only connect the washing machine to an alternating,
earthed power point that has been properly installed.
The voltage of the network should match that of the
voltage data indicated on your washing machine (let
tering on the appliance).
This lettering indicates the connected power and fuse
necessary.
Check that:
- the plug and the power point are compatible,
- the cables' transversal section is sufficient,
- the earth connection has been properly installed.
Change of feeder (if needed) only by specialised per
sonnel.
The spare feeder is available in Technical Assistance
Service.
Do not use adaptors, multiple unions or extensions.
If a residual current protection switch is used, only use
a type with this symbol: 7.
Only this symbol guarantees compliance with current
standards.
Do not put the plug into the power point, or pull it out,
if your hands are wet.
When unplugging the cable from the power point,
grasp it by the plug and never by the cable itself.
Advertisement
Table of Contents
