Table of Contents
Advertisement
Cleaning the drain
pump
Drain the water
This is necessary if the washing solution has not been
completely drained. The pump is blocked by either
loose debris or fluff which accumulates if fluff giving
fabrics are washed.
(Up to 20 litres. Have a suitable container ready.)
d Risk of scalding!
Allow the hot water to cool down beforehand.
Keep children and pets away from the washing
machine.
q Turn the programme selector to Off.
q Open service flap and remove it.
q Remove the drain hose from its holder and pull the
hose out of the housing.
90 °C
q Pull down the closing cap carefully and allow the
max.
washing lye to flow into a suitable container.
q Push up the closing cap (1st) and place the drain
hose back in its holder (2nd).
q Carefully remove the pump cap.
A little more residual water will flow out.
q Remove foreign objects/fluff from inside and clean
the interior. The pump impeller wheel must be able
to rotate.
Clean any residual lye or fluff from the thread of the
pump cap and pump housing.
q Insert the pump cover and screw tight.
q Insert and close the service flap.
To prevent unused detergent from flowing into the
drain during the next wash cycle:
q Pour 1 litre / 1 ¾ pt of water into chamber II.
q Select the Drain b programme.
21
Advertisement
Table of Contents
