Table of Contents
Advertisement
Practical tools
Measurements
30
Fixed to the appliance's rear panel:
- The drainage hose
- the cable and plug for connecting to the mains.
Depending on the precise location chosen for the
machine, the following may also be needed:
- a 24-40 mm diameter clamp (from a specialised
outlet), to install a U-bend.
In the bag:
- the protective covers to cover openings after
removing the protection provided for
transportation.
The following tools may be very useful when installing
and connecting:
- a monkey wrench which can be set to 13
- spirit level.
- screwdriver.
a = 600 mm
b = 590 mm
c = 852 mm
Weight 69 83 kg (depends on appliance)
Advertisement
Table of Contents
