2.3 Maintenance
Parameter & Description
Password (Confirmation)
Confirmation of the administrator-level log-in password.
Programming Auto Disconnect Time Settings
Parameter & Description
Programming Auto Disconnect Time (min) 1-30min
Specifies the time (in minutes) until programming is
automatically terminated.
If the specified period of time passes with no programming
input, programming will automatically be terminated. This
prevents problems caused by continuation of log-in status in
cases such as being unable to log out due to the sudden
failure of a PC.
Periodic Diagnosis Time Interval Settings
Parameter & Description
*
Periodic Diagnosis Time Interval (min) 0-1440min
Specifies the time (in minutes) between periodic self-
diagnoses to test operation as described in "2.3.3 Diagnosis".
If failures are detected during the self-diagnosis, the card will
alert the PBX.
Program Version
Parameter
Program Version
42
Programming Guide
Default
Value Range
No default
Max. 16 characters
Default
Value Range
10
1 to 30
Default
Value Range
60
0 (no periodic
diagnosis),
1 to 1440
Default
Value Range
Display only