Automatic Route Redirection - Panasonic KX-TDA0484 Programming Manual

Detailed Explanations

Automatic Route Redirection

When more than one card is installed in a PBX, you can assign them to a single gateway group.
Grouping allows you to logically combine the channels of multiple cards in a PBX (there are 4
channels per card). This aids the effective use of channels in a PBX.
The following diagram and tables provide an example of this configuration.
Example of Configuration
In the diagram below, there are 2 cards (cards B and C) installed in PBX 2.
PBX 1
• PBX Code: 951
• Extension Number: 3 digits
IP Address: 192.168.1.1
Example of Gateway Entry Programming
Through gateway entry programming, cards B and C are grouped into a single gateway group.
Parameter
GW No
Comment
IP Address
Group No.
Example of DN2IP Entry Programming
When DN2IP entries are programmed as in the table below, calls through card A arrive at gateway
group 1, which includes cards B and C.
Parameter
Leading Number
Remaining Number of Digits
GW No/Group No. Selection
GW No/Group No.
Card A
0
IP-GW Card A
192.168.1.1
0
951
3
GW
0
• PBX Code: 952
• Extension Number: 4 digits
Gateway Group 1
IP Address: 192.168.1.2
IP Network
IP Address: 192.168.1.3
Card A Card B
1
IP-GW Card B
192.168.1.2
1
To Card A
2.2 Programming
PBX 2
Card B
Card C
Card C
2
IP-GW Card C
192.168.1.3
1
To Gateway Group 1
(Cards B and C)
952
4
Group
1
Programming Guide 37