Programming; Network Parameters - Panasonic KX-TDA0484 Programming Manual

2.2 Programming

2.2 Programming
2.2.1

Network Parameters

1.
Click 1.1 Network Settings, General in the main menu.
Current IP Address, Current Subnet Mask, and Current Default Gateway show the current
IP address settings of the VoIP Gateway Card.
2.
Assign each parameter referring to the descriptions below.
At any time during the session, you can:
• Click ALL CLEAR to return all parameters to their previous values.
• Click MENU to return to the main menu (see "2.1 Main Menu for the Administrator").
• Click LOGOUT to log out from the IP-GW4 Maintenance Utility (see "2.5.2 Log Out").
3.
Click OK.
You will see a confirmation screen.
Note
If your entry contains an invalid value, you will be prompted to correct your input. Enter
correct values for the parameters shown in red and try again.
4.
Confirm your entry and click OK.
To return to the previous screen, click CANCEL.
10 Programming Guide