Updating Firmware; Update The Firmware By Using The Usb Port - Samsung SL-C2670FW Service Manual

4. Alignment and Troubleshooting

4.1.6. Updating Firmware

This chapter includes instructions for updating the printer firmware. You can update the printer firmware by using one
of the following methods :
•

Update the firmware by using the USB port.

•
Update the firmware by using the Network.
4.1.6.1. Update the firmware by using the USB port
Upgrading preparations
NOTE
Firmware file can be downloaded from the GSPN or TSP site.
•
C2670_Vx.xx.xx.xx.exe file
Upgrade Procedure
CAUTION
• Please do not turn off the printer and your computer until firmware update finishes.
• If you are using USB connection, disconnect all other USB printers from the PC.
• The firmware update you are about to install has been tested for compatibility with Samsung toner cartridge
products ONLY. Installing the upgrade may cause a non-Samsung toner cartridge to malfunction.
• Do not run your printer during the firmware update.(Do not have any print job)
1) Make sure that the machine is connected to the PC with a USB cable or Network.
2) Execute the firmware exe file.
3) Please wait until the machine is reboot.
4-21 Copyright© 1995-2016 SAMSUNG. All rights reserved.