Drive-T1; Fuser Drive Unit - Samsung SL-C2670FW Service Manual

3.4.14. DRIVE-T1

1. Remove the right cover. (Refer to 3.4.1)
2. Remove the SMPS board. (Refer to 3.4.6)
3. Remove the main board bracket after removing 4
screws.

3.4.15. Fuser Drive Unit

1. Remove the right cover. (Refer to 3.4.1.)
2. Remove the RADF and platen unit. (Refer to 3.4.7~9.)
3. Remove the middle cover. (Refer to 3.4.10.)
4. Remove 1 screw. And then, release the harness
holder[A].
Copyright© 1995-2016 SAMSUNG. All rights reserved.
4. Remove the BRACKET-T1 after removing 3 screws.
5. Unplug the motor harness. Remove 4 screws. And
then, release the fuser drive unit.
3. Disassembly and Reassembly
3-20