Recommended Drive Cable Connections
•
•
Connecting Drive Cables
When you install a drive, you connect two cables—a DC power cable and a
data cable—to the back of the drive.
Drive Interface Connectors
The drive cable connectors are keyed for correct insertion. Properly align the
cable connector key on the cable and the drive before connecting.
Downloaded from
www.Manualslib.com
Connect serial ATA hard drives to connectors labeled "SATA0" or "SATA1"
on the system board.
Connect serial ATA CD or DVD drives to connectors labeled "SATA4" or
"SATA5" on the system board.
NOTE:
SATA 4 and SATA 5 are not supported on Inspiron 530b/530d.
1
power cable
1
2
1
interface cable
manuals search engine
Power Connector
1
2
2
power input connector
Serial ATA Connector
2
interface connector
Removing and Installing Parts
139