Installing the hard drive
1. Replace the M3.0x3.0 screws to secure the hard drive to the hard drive bracket.
2. Insert the hard drive into its slot in the computer.
3. Replace the M3.0x3.0 screws to secure the hard drive to the computer.
4. Install the:
a.
battery
b.
battery cover
5. Follow the procedure in
Hard drive cable connector
Removing the hard drive cable connector
1. Follow the procedures in
2. Remove the:
a.
battery cover
b.
battery
c.
base cover
d.
hard drive
3. To remove the hard drive cable connector:
a. Remove the M2.5x5.0 screws that secure the hard drive connector to the system board [1].
b. Remove the hard drive cable connector from the computer [2].
Installing the hard drive cable connector
1. Connect the hard drive cable to the system board.
After working inside your
Before working inside your
computer.
computer.
Disassembly and reassembly
13