Hard drive cable connector
Removing the hard drive cable connector
1. Follow the procedures in
2. Remove the:
a)
battery cover
b)
battery
c)
base cover
d)
hard drive
3. To remove the hard drive cable connector:
a) Remove the M2.5x5.0 screws that secure the hard drive connector to the system board [1].
b) Remove the hard drive cable connector from the computer [2].
Installing the hard drive cable connector
1. Connect the hard drive cable to the system board.
2. Insert and route the cable through the routing channel.
3. Replace the M2.5x5.0 screws to secure the hard drive cable connector to the computer.
4. Install the:
a)
hard drive
b)
base cover
c)
battery
d)
battery cover
5. Follow the procedure in
Before working inside your
After working inside your
computer.
computer.
Disassembly and reassembly
15