Starting The Dell Diagnostics From The Drivers And Utilities Media - Dell Inspirion 530 SERIES Owner's Manual

3 When the DELL™ logo appears, press <F12> immediately. Select Boot
4 Press any key to start the Dell Diagnostics from the diagnostics utility

Starting the Dell Diagnostics From the Drivers and Utilities Media

1 Insert the Drivers and Utilities media.
2 Shut down and restart the computer.
3 When the boot device list appears, highlight CD/DVD/CD-RW and press
4 Select the Boot from CD-ROM option from the menu that appears and
5 Type 1 to start the CD menu and press <Enter> to proceed.
6 Select Run the 32 Bit Dell Diagnostics from the numbered list. If
7 When the Dell Diagnostics Main Menu appears, select the test you want
Downloaded from www.Manualslib.com
to Utility Partition from the boot menu and press <Enter>.
NOTE:
If you wait too long and the operating system logo appears, continue
to wait until you see the Microsoft
computer and try again.
NOTE:
If you see a message stating that no diagnostics utility partition has
been found, run the Dell Diagnostics from the Drivers and Utilities media.
partition on your hard drive.
When the DELL logo appears, press <F12> immediately.
NOTE:
If you wait too long and the operating system logo appears, continue
to wait until you see the Microsoft
computer and try again.
NOTE:
The next steps change the boot sequence for one time only. On the
next start-up, the computer boots according to the devices specified in the
system setup program.
<Enter>.
press <Enter>.
multiple versions are listed, select the version appropriate for your
computer.
to run.
manuals search engine
® ®
Windows desktop; then, shut down your
® ®
Windows desktop; then, shut down your
Troubleshooting Tools
91