Vivitar DVR 920HDV2 User Manual page 7

on the LCD screen. Select „Yes‟ and press the OK/LED button on the control joystick to
move the images to the SD Memory card inserted.
Note: Images captured in internal memory will be erased when the camera powers off if
they are not saved.
Note:

After the digital video recorder is powered on, an SD icon will appear on the LCD display,
indicating that the SD memory card has been successfully installed. The captured images
are then stored on the SD card and not in the limited internal memory. If you do not see the
SD icon on the display, please check if the card was inserted properly.

Make sure the SD card is not locked (check the lock switch on the side of the SD card). If the
SD card is locked this will prevent the camera from saving captured photos to the SD card.

Formatting will delete all data on the SD Memory Card including protected data.

Do not remove the SD memory Card during formatting as this may damage the card and
render it unusable.
3) Power On
Flip open the LCD screen and press the POWER button
turn on the digital video recorder.
, located on the inside wall, to
6