Table of Contents
Advertisement
2)
Press the Up or Down on the control joystick to highlight the White Balance Menu.
3)
Press the OK/LED button to select the White Balance Menu.
4)
Press the Up or Down on the control joystick to select your desired option.
5)
Press the OK/LED button to confirm, save your choice and exit back to the Still Record
Menu.
Alternatively, select „Exit‟ or press the MENU button to exit the White Balance Menu and
return to the Still Record menu screen.
6)
Press the MENU button to exit the Still Record Menu screen and return to the Photo
Capture mode.
Note: After saving your selection and exiting the Menu screen, the corresponding icon
will appear on the LCD screen.
Exposure Menu
The Exposure setting helps you control the amount of light that enters your camera‟s lens. This
setting should be adjusted when the environment is lighter or darker than normal.
When the environment has more light than is needed, reduce the exposure setting (by using the
negative - count) to reduce the amount of light allowed into the lens by your camera.
If the environment has less light (darker) than is needed, increase the exposure setting (by
using the positive + count) to increase the amount of light allowed into the lens by your camera.
1)
Press the MENU button to enter the Photo Capture Menus.
2)
Press the Up or Down on the control joystick to highlight the Exposure Menu.
3)
Press the OK/LED button to select the Exposure Menu.
4)
Press the Up or Down on the control joystick to select your desired option.
5)
Press the OK/LED button to confirm, save your choice and exit back to the Still Record
Menu.
Alternatively, select „Exit‟ or press the MENU button to exit the Exposure Menu and
return to the Still Record menu screen.
30
Advertisement
Table of Contents
