Table of Contents
Advertisement
Night Vision: LED Flash and IR Light
Your digital video recorder includes the LED and Night Vision feature. These features increase
the lighting in dark situations.
LED Flash
1)
Press the OK/LED button to activate the LED Flash Light on the front of the camera
below the lens.
When the LED light is on, an icon on the bottom right of the LCD screen appears.
2)
Press the OK/LED button again to turn the LED off.
IR Light and IR Bracket (IR Holder)
1)
Install the IR Light batteries:
Twist the cover to open and insert the batteries as shown above.
Twist the cover in the opposite direction to close the cover.
2)
Place the IR Bracket on the lens.
Make sure the bottom rubber strap is holding the Bracket securely to the lens (as shown
above).
3)
Place the IR Light onto the Bracket by gently pushing the IR Light into the top section of
the Bracket.
Make sure the side with the light is facing outwards.
4)
To turn the IR Light on and off, push in the black button.
5)
The IR button is located on the cover for the batteries.
15
Advertisement
Table of Contents
