Installation - ATEN cs-521 User Manual

Installation

Before you begin, make sure that power to all the
1.
devices you will be connecting up have been
turned off. You must unplug the power cords of
any computers that have the Keyboard Power On
function. Otherwise, the switch will receive power
from the computer.
To prevent damage to your installation, make sure
2.
that all devices on the installation are properly
grounded.
Refer to the Installation diagrams on the next two pages as you
perform the following steps:
1. Plug your keyboard, monitor, and mouse into the appropriate
Console ports of the CS-521 / CS-522 Switch. Each port is
labeled with an appropriate icon to indicate itself.
2. (Optional) Plug your speakers into the CS-521 / CS-522's
speaker jack.
3. Plug the attached KVM cables' connectors into their
respective ports on the computers you are installing.
4. Turn on the power to the computers.
Note: The CS-521 / CS-522's Power On default is to link to
the first computer you turn on.
- 6 -
2003-06-24