Changing Default Settings - Epson PLQ-30 User Manual

Auto line feed
When auto line feed is set to On, the printer accompanies each carriage return (CR) code received with
a line feed (LF) code.
Auto CR (IBM PPDS)
When auto carriage return is set to On, each line feed (LF) code or ESC J code is accompanied by a
carriage return (CR) code so the printer moves the next printing start position to the left margin.
When this setting is set to Off, you must send a CR code after the line feed code to move the printing
start position to the left margin.
This feature is only available in IBM PPDS emulation mode.
A.G.M. (IBM PPDS)
When the alternate graphic mode (A.G.M.) is set to On, the ESC 3, ESC A, ESC J, ESC K, ESC L, ESC Y,
ESC Z, and ESC * commands in IBM PPDS emulation mode work the same way as in ESC/P2 or
ESC/P2+ESC/MC mode.
This feature is only available in IBM PPDS emulation mode.
IBM character table (IBM PPDS)
Select Table2 or Table1 for the IBM character table.
This feature is only available in IBM PPDS emulation mode.
Columns
You can select the number of columns in one line.
Paper loading
When you set Auto Load, the printer loads paper just after it is inserted. When you set Data Exists,
the printer does not load the paper until it receives the data.

Changing default settings

The following table shows the basic function of each button in the default setting mode.
PLQ-30/PLQ-30M User's Guide
Control Panel 68