Backpack Carrying System; Switching On - Stihl HLA 65 Instruction Manual

English

Backpack Carrying System

The backpack carrying system is a
special accessory for machines with a
telescoping shaft.
It spreads the weight of machine evenly
over the shoulders, back and hips.
1
Put the backpack carrying
N
system (1) on your back and adjust
it as described in the instruction
leaflet provided.
Secure the sliding adjuster (2) to the
N
shaft.
Attach the machine to the carrying
N
strap when working.
52
3
2
Adjust the hip belt (3), both shoulder
N
straps (4) and the carrying strap (5).
Squeeze the grips to move the
N
sliding adjuster up or down the
shaft.

Switching On

The starter battery of a factory-new
machine is not fully charged.
4
Recommendation: Fully charge the
battery before using it for the first time.
If necessary, remove the cover from
N
5
the battery compartment before
fitting the battery, i.e. depress both
locking tabs to unlock and remove
the cover.
Fitting the Battery
Insert the battery (1) in the power
N
tool – the battery slides into the
compartment – press it down
carefully until it snaps into position –
the battery must be flush with the
top of the housing.
Switching on the Machine
Your machine cannot be switch on while
it is in the transport position.
Make sure you have a secure and
N
firm footing.
Stand upright – hold the power tool
N
in a relaxed position.
1
HLA 65, HLA 85