Options - Konica Minolta bizhub C200 Quick Manual

Options

This section describes the configuration of the options installed on this machine.
By adding options, various office needs can be satisfied.
12
No. Part name
1 Main unit
2 Reverse automatic docu-
ment feeder DF-612
3 Original cover OC-508
4 Working table WT-503
5 Automatic duplex unit AD-
505
6 Multi bypass tray MB-502
7 Paper feed cabinet PC-105
8 Paper feed cabinet PC-104
9 Paper feed cabinet PC-204
10 Paper feed cabinet PC-405
C200
2
1
11 10
Description
The document is scanned by the scanner section, and the scanned image is
printed by the printer section.Referred to as the "machine", the "main unit", or
the "C200" throughout the manual.
Automatically feeds one document sheet at a time for scanning, and automat-
ically turns over double-sided documents for scanning.Referred to as the
"ADF" throughout the manual.
Presses down on the loaded document to keep it in place.Referred to as the
"original cover" throughout the manual.
Provides an area to temporarily place a document or other materials.
Turns over printed pages, allowing double-sided pages to be printed automat-
ically.
Referred to as the "duplex unit" throughout the manual.
Can be loaded with up to 100 sheets of paper.
Referred to as the "bypass tray" throughout the manual.
Can be loaded with up to 500 sheets of paper.
Referred to as the "additional paper feed cabinet" throughout the manual.
The top drawer can be loaded with up to 500 sheets of paper, and the bottom
drawer can be used as storage.
Referred to as the "single paper feed cabinet" throughout the manual.
Both the top and bottom drawers can each be loaded with up to 500 sheets of
paper.
Referred to as the "double paper feed cabinet" throughout the manual.
Can be loaded with up to 2,500 sheets of paper.
Referred to as the "LCT" throughout the manual.
3
7
9 8
4
5
6
x-71