HP 5900 Series Configuration Manual page 61

assigning IRF device member IDs, 16
binding IRF physical port to IRF port, 17
configuring ARP MAD-enabled IRF, 41
configuring BFD MAD-enabled IRF, 36
configuring IRF, 14, 31
configuring IRF ARP MAD, 27
configuring IRF BFD MAD, 25
configuring IRF bridge MAC persistence, 21
configuring IRF global link load sharing mode, 20
configuring IRF LACP MAD, 24
configuring IRF link load sharing mode, 20
configuring IRF MAD mechanisms, 23
configuring IRF member device description, 20
configuring IRF ND MAD, 28
configuring IRF port-specific link load sharing
mode, 20
configuring LACP MAD-enabled IRF, 31
configuring ND MAD-enabled IRF, 45
connecting IRF physical ports, 17
displaying IRF fabric, 31
enabling IRF software auto-update, 22
excluding port from IRF shutdown action, 29
planning IRF fabric setup, 15
recovering IRF fabric, 30
setting IRF link down report delay, 23
specifying IRF device member priority, 16
recovering IRF fabric, 30
restrictions
IRF MAD configuration, 13
IRF physical ports, 13
IRF software requirements, 13
setting
IRF link down report delay, 23
shutdown action, 29
software auto-update, 22
specifying IRF device member priority, 16
split
IRF ARP MAD, 10
IRF BFD MAD, 9
IRF fabric, 4
IRF LACP MAD, 8
IRF MAD, 7
IRF MAD handling procedure, 7
IRF master election, 7
IRF ND MAD, 1 1
recovering IRF fabric, 30
synchronization mechanism, 7
topology
ARP MAD-enabled IRF configuration, 41
BFD MAD-enabled IRF configuration, 36
IRF application scenario, 1
IRF configuration, 13, 14, 31
IRF master election, 7
IRF overview, 1
LACP MAD-enabled IRF configuration, 31
ND MAD-enabled IRF configuration, 45
57