Stihl FR 130 T Instruction Manual page 26

English
Symbol on slide control
7 h – stop symbol and arrow. To stop
the engine, push the slide control in
the direction of the arrow on the stop
symbol (h) to STOP-0.
Starting
Press down the trigger lockout lever
N
and squeeze the throttle trigger
and hold them in that position.
N
Move the slide control to START
N
and hold it there.
Now release the throttle trigger,
N
slide control and trigger lockout in
that order. This is the starting
throttle position.
9
8
Set the choke knob (8)
N
24
g if the engine is cold
e for warm start – also use this posi-
tion if the engine has been running
but is still cold.
Press the manual fuel pump
N
bulb (9) at least five times – even if
the bulb is already filled with fuel.
Cranking
Put the unit on the ground. Make
N
sure it is secure.
Keep the flexible shaft as straight as
N
possible.
WARNING
The throttle cable must be positioned
parallel to the flexible shaft, not wrapped
around it.
If fitted: Remove the transport guard
N
from the attachment.
Rest the KombiTool's gearbox on a
N
raised support, e.g. trestle, forked
branch or something similar, to
ensure it is clear of the ground.
WARNING
To reduce the risk of accidents, make
sure the attachment and guard are not
touching the ground or any other
obstacles.
FR 130 T