Stihl FR 130 T Instruction Manual page 21

1
Screw the mowing head
N
counterclockwise on to the shaft (1)
as far as stop.
Block the shaft.
N
Tighten down the mowing head
N
firmly.
NOTICE
Remove the tool used to block the shaft.
Removing the Mowing Head
Block the shaft.
N
Unscrew the mowing head
N
clockwise.
Mounting Metal Cutting Attachment
Keep the leaflet and packaging of the
metal cutting attachment in a safe place.
FR 130 T
WARNING
Wear protective gloves to reduce the
risk of direct contact with the sharp
cutting edges.
Mount only one metal cutting
attachment.
Check direction of rotation of cutting
attachment
1
3
4
Cutting attachments with 2, 3 or 4 teeth
(1, 4, 5) may point in either direction –
these cutting attachments must be
turned over regularly to help avoid one-
sided wear.
The cutting edges of the grass cutting
blades (2, 3) must point clockwise.
WARNING
Direction of rotation is indicated by an
arrow on the inside of the deflector.
2
Place the cutting attachment (6) on
N
the thrust plate (7).
5
WARNING
Collar (see arrow) must engage the
cutting attachment's mounting hole.
Securing the cutting attachment
Fit the thrust washer (8) – convex
N
side must face up.
Fit the rider plate (9).
N
Block the shaft (10).
N
Use the combination wrench (12) to
N
screw the mounting nut (11) on to
the output shaft counterclockwise
and tighten it down firmly.
WARNING
If the mounting nut has become too
loose, fit a new one.
English
19