Table of Contents
Advertisement
Recording
Reducing noise when recording AM
Remote control only
Hold down [PLAY MODE] while recording.
Every time you hold down the button: BP1 ↔ BP2
Choose the setting with the least noise.
Notes
•
Changes to volume and sound/field quality do not affect recording.
•
You cannot open deck 1 while recording.
•
You cannot fast-forward or rewind one deck while recording with
the other.
•
When recording an AM broadcast, sound is momentarily interrupted
when you start and stop the recording.
Erasure prevention
Use a screwdriver or similar
object to break out the tab.
To re-record on a protected cassette
Cover the hole with adhesive tape.
To erase a tape
1. Press [:, TAPE] and then [L, STOP].
2. Insert the recorded tape into deck 2.
Ensure there is no tape in deck 1.
3. Press [a REC].
Optional antenna connections
Use outdoor antenna if radio reception is poor.
FM outdoor antenna
For Europe
For Australia and
New Zealand
1
2
1
30 mm
2
Shield braid
15 mm
Core wire
3
•
Disconnect the FM indoor antenna.
•
The antenna should be installed by a competent technician.
12
RQT6713
Side A
Tab for side B
Tab for side A
Adhesive tape
FM outdoor antenna
(not included)
75 Ω coaxial cable
(not included)
(For United Kingdom only)
Antenna plug
adaptor (included)
Optional antenna connections
AM outdoor antenna
AM outdoor antenna
For Europe
1
2
For Australia and
1
New Zealand
2
Run a piece of vinyl wire horizontally across a window or other
convenient location.
Leave the loop antenna connected.
Note
Disconnect the outdoor antenna when the unit is not in use.
Do not use the outdoor antenna during a lightning storm.
External unit connections
Rear panel of
this unit
(R)
•
An analogue player with a built-in phono equalizer can be connected.
•
For details, refer to the instruction manual of the units which are to
be connected.
•
When units other than those described above are to be connected,
please consult your audio dealer.
Using an external unit
REC
AUX
(See above for external unit connection)
1. Press [AUX].
The unit comes on.
2. For listening : Proceed to step 3
For recording : Press [a REC] (recording starts).
3. Start playback from the external source. (For details, refer to the
external unit's instruction manual.)
Using headphones (not included)
Reduce the volume level and connect the headphones.
Plug type: 3.5 mm stereo
Note
Avoid listening for prolonged periods of time to prevent hearing damage.
(not included)
5 -12 m
AM loop
antenna
(included)
R
L
(L)
Analogue player
(not included)
Headphones
(not included)
Hide quick links:
Advertisement
Table of Contents
