Cds - Panasonic SC-AK110 Operating Instructions Manual

CDs

CD selection
Choose CDs with this mark:
Do not:
•
use irregularly shaped CDs.
•
attach extra labels and stickers.
•
use CDs with labels and stickers
that are coming off or with
adhesive exuding from under
labels and stickers.
•
attach scratch proof covers or
any other kind of accessory.
•
write anything on the CD.
•
clean CDs with liquids. (Wipe
with a soft, dry cloth.)
•
use CDs printed with label printers available on the market.
To prevent damage
Always observe the following points:
•
Load only 1 CD on the tray.
•
Load CDs as shown in the figure.
An adaptor is not needed with 8 cm CDs (singles).
XXXXXX XXX XXXXXXX
XXXX XX XXXXX
XXXX XX XXXXX XXXX XX XXXXX
XXXX XXXX XXXXX XXXX XXXX XXXXX
•
Set the system on a flat, level surface.
•
Always unload all CDs before moving the unit.
Do not:
•
set the unit on top of magazines, inclined surfaces, etc.
•
move the unit while a tray is opening/closing, or when loaded.
•
put anything except a CD in the tray.
•
use cleaning CDs or CDs which are badly warped or cracked.
•
disconnect the AC mains lead from the household mains socket
during disc changing operation.
This unit can play CD-DA (digital audio) format audio CD-R and
CD-RW that have been finalized (a process that enables CD-R/
CD-RW players to play audio CD-R and CD-RW) upon completion
of recording.
It may not be able to play some CD-R or CD-RW due to the
condition of the recording.
8
RQT6713
XXXX XXXX XXXXX XXXX XX
XXXX XXXX XXXXX
XXXX XXXX XXXXX x
XXXX XXXX
8 cm CD
12 cm CD
1
Press [c, OPEN/CLOSE] to open the tray.
The unit comes on.
2
Set a CD in the tray.
(Label must face upward.)
To continue loading CDs in the other trays
Press [1]–[5] to select the required tray and press [c, OPEN/
CLOSE] to open the tray.
Press [c, OPEN/CLOSE] to close the tray.
3
Press [1]–[5] to play your desired disc.
(Alternatively, you can press [:/J, CD] if the current disc is your
desired CD.)
The track number and its elapsed playing time are shown.
Display during play
(example):
Track number
Current
disc
indicator
Elapsed playing time (of current track)
Use the CD Play Mode function's ALL-DISC mode to play CDs in
succession. (A page 9)
To stop the disc play
Press [L, STOP].
The total number of tracks and total playing time are shown.
" " (SC-AK110: " ") indication
It indicates current disc has 16 or more tracks.
One touch play
During standby mode and when a CD is loaded, press [:/J, CD] or
[1]–[5].
The unit comes on and play starts.
To pause Press [:/J, CD] during play.
Press again to resume play.
To search forward/ Hold down [g/REW/3] (backward)
backward or [f/FF/4] (forward) during play or pause.
To skip forward/ Press [g/REW/3] (backward) or
backward [f/FF/4] (forward) during play or pause.
Notes
•
During 1-RANDOM or A-RANDOM play (A page 9), you cannot
skip to tracks already played.
•
During program play (A page 9), 1-RANDOM or A-RANDOM play,
you can search only within the track.
•
Always stop the changer before loading or changing CDs. You
cannot change CDs while a disc is playing.
CD display
You can display the remaining play time of the current track.
SC-AK310
Remote control only
Press [CD DISP] during play or pause.
SC-AK210
Remote control only
Press [CD/RDS DISP] during play or pause.
SC-AK110
Press [-DISP/–DEMO] during play or pause.
Remote control: Press [CD DISP].
Every time you press the button:
Elapsed play time ↔ Remaining play time
Note
When track number 25 or greater is playing, remaining play time
display shows "– –:– –".
1 • 2
SLEEP SLEEP CLOCK CLOCK PL PLAY
3
AUTO OFF UTO OFF TIMER TIMER REC REC
DISC DISC
1 2 3
PROGRAM PROGRAM
4 5 6
S.SOUND EQ S.SOUND EQ
7 8 9
PRESET EQ PRESET EQ
0
10 10
CD CD
TUNER TUNER TAPE TAPE
BAND BAND
SC-AK310
AUX AUX
VOL VOL VOL VOL
SC-AK110
MUTING REW MUTING REW CLEAR CLEAR FF FF
CD DISP CD DISP DIMMER PLAY MODE DIMMER PLAY MODE
CD DISP
SC-AK210
CD/RDS DISP