• Relocate the origin point
Menu
Display Screen
Origin
Key Operation from Top Menu:
Press the [ F2 ] key.
Operation Procedure : Position the carriage at the point of origin by using the cursor keys
ing the [ ENTER ] and [ F1 ] key.
• If only the [ F1 ] key is pressed, the tool carriage will move to the position of the current point of
origin.
• Compensate for distance
Menu
Display Screen
Calibrate
Key Operation from Top Menu:
After pressing the [ NEXT ] key two times, press the [ F4 ] key.
Operation Procedure : After pressing the [ NEXT ] key two times, press the [ F4 ] key. Use the
[ F1 ] key to select either the X axis or Y axis. Adjusting to a revised value
is performed using [ F3 ] and [ F4 ] with a supported adjustment range from
-0.19% to +0.19%.
• When these revised values are used during actually cutting operations, the unit calculates opera-
tion values by comparing those values received from the computer with those actually required.
• Delete data in the machine
Menu
Display Screen
BufferClear
Key Operation from Top Menu:
Press the [ F1 ] key .
Operation Procedure : Press the [ F1 ] key to display the screen for carrying out buffer clear.
Pressing the [ F3 ] key selects [ No ] and the display returns to the previous
screen without clearing the buffer.
,
) and the [ FAST] key to move the carriage. Set the value by press-
Pressing the [ F4 ] key selects [ Yes ] and clears the buffer.
27
Origin
TopMenu
X:
0
Y:
0
SelectAxis[X]
TopMenu
DOWN
0.00%
UP
Replot
BufferClear
Cuttest
Tool[ UP ]
,
,