Samsung WF365BTB series Service Manual page 18

Part
Disassembling and
Repairing the water
supply Valve
Disassembling and
Repairing the water
level sensor.
Disassembling the
inside Detergent box
16 _ Removal and Reassembly
figure
Use the long nose
4 Check Points for Troubleshooting
• Check the resistance with a tester.
Description
1. Separate the COVER-TOP and then separate
the wire connected to the valves.
2. Remove the 4 screws fixing the valves.
3. Remove the hose connected to the valves.
(Use the plier to remove the hose)
1. Separate the wire connected the SENSOR-
PRESSURE.
2. Adjust the plastic clip( of pressure sensor)
between two nose of plier, then grip and pull the
plastic clip with caution(Use the long nose plier
to push the hook).
3. Remove the hose from the SENSOR-
PRESSURE.
• Hold the Clamp of the Detergent Box and
disassemble the Hose-Drawer-Tub.