Samsung WF365BTB series Service Manual page 14

Part
separating the
Cover_Top and
Panel-Control
(Check main-PCb
and sub-PCb)
12 _ Removal and Reassembly
figure
Separate Button
2
1
Description
1. Remove the 2 hexagon screws, which are at the
back, fixing the COVER-TOP.
2. Disassemble the COVER-TOP by sliding it
backwards and remove the 4 screws on the
PANEL-CONTROL.
3. Press the Separate button to separate the ASSY
DRAWER.
4. Disassemble the HOUSING-DRAWER from the
PANEL-CONTROL(Push back and then push
Housing-drawer upside to separate)
5. Pull the PANEL-CONTROL towards and then lift
it upwards to separate.
6. Disassemble the WIRE-HARNESS connected to
the the ASSY PCB."