Programme Finished At - Bosch WFR 2830 Instruction Manual And Installation Instructions

Programme
finished at
Example:
Make sure that the time has been set - see Set
clock", Page 36.
Before starting a programme, you can specify the time
at which the programme ends.
q Turn the programme selector to the desired
programme.
q Load the laundry and close the loading door.
The Start/Pause" indicator light flashes (red).
q Select an additional option.
q Press the Menu" button until,
Programme finished at" is displayed.
Current end time flashes.
The Start/Pause" indicator light flashes (red).
i The menu is left if a button is not pressed within
10 seconds.
q Press the Change" button until the programme
end time is displayed.
The programme end can be set in 30 minute
steps.
The time can be programmed up to a maximum
24 hours in advance.
i The end time must be reset if the programme,
additional options or the current time is changed.
i If there is a small load of lightly soiled washing, the
programme may end well before the selected end
time.
If there is a large load of heavily soiled washing, the
programme may end several minutes after the
selected end time.
You can change other settings
or
q Press the Start/Pause" button.
The delayed Start is activated.
The indicator light is on.
29